P7 300 & 300R
Metal surfaces can be cleaned of paint, corrosion, rust, and other pollutants using the portable P7-300 grit blaster.
After painting, it gives the surface a bit more texture, increasing both its long-term durability and appeal.
By removing impurities like corrosion, rust, dust, and other pollutants, sandblasting can increase a material's dependability and longevity.
A sandblasting machine is the best tool for cleaning surfaces.
The grit blaster makes it easier to clean surfaces of dust and other unwanted particles.
For surface cleaning and finishing, the Grit Blaster P7 500 with glass beads abrasive medium is employed.
Portable Grit Blaster P7 300 & 300R and Small grit blaster are using for the process of cleaning, debur, eatching, smoothing, shaping, and cleaning a surface by forcing solid particles across that surface at high velocity, industrial grit blaster effect is similar to that of using sandpaper, but provides a more even finish with no problems at corners or crannies or cracks. Portable grit blasting machine can occur naturally, usually as a result of particles blown by wind causing erosion, or artificially, by using compressed air using grit blasting air compressor.
Small grit blaster or (Portable Grit Blaster P7 300 & 300R) without remote control, which means the operator needs to manually switch ON/OFF the machine knob of the grit blasting pot. In automatic On/Off industrial grit blaster, the dead man handle used at the operator's hand, when it needs to on and off then operators can start and stop this small grit blaster.
Pressure grit blaster cabinet is easy to move one place to other. A portable grit blaster is used for cleaning, rust removal, and corrosion removal.
| Abrasive Tank Capacity (Metallic) | 300 kg |
| Abrasive Tank Capacity (Sand) | 130 Kg |
| Volume | 85 Ltrs |
| Grit blaster Hose Length | 5 Mtrs |
| Grit blaster Hose I.D. | 19 mm |
| Grit blaster Nozzle Orifice (Tungsten Carbide) | 6 mm |
| Height | 1291 mm |
| Diameter | 461 mm |
| Weight | 141 Kg |
| Air Filter & Pressure Gauge fitted | 1 No. Each |
| Automatic Exhaust Valve fitted | 1 No. |
| Abrasive Control through Pinch Valve fitted | 1 No. |
| Approx. Cleaning Rate [Only for guidance] | 5-9 Sq. Mtrs./Hr. |
| Compressed air required at 80 psi. | 85 cfm |
| Recommended Abrasive Size | 25 to 80 Mesh. |
India’s top Portable Grit Blaster P7 300 & 300R, the manufacturer is used for cleaning, rust removal, and corrosion removal. Blaster provide service in all cities as (Alwar, Faridabad, Gurgaon, Noida, Ghaziabad, Agra, Chennai, Pune, Bangalore, Mumbai, Kolhapur, Solapur, Madurai, Coimbatore, Kolkata, Jodhpur, Jaipur, Bhiwadi) at low cost, best price with the best quality. Contact Us Today.